•
Diamond Lapping compound used on surface finishing
of Ferrous and Non-Ferrous metals / Hard components,
Wire drawing Dies, Plastic moulds,
Ceramic, Carbon etc.
• Available in 5 Grams pack.
• Different grades Corse (25,50) Medium (14,8) &
Fine (3,1) microns are available.
DIAMOND FILE /PINS :-
This
is a electroplated products.
Application of these tools are in a small tools & dies
Electroplated Diamond Files are available in different shapes.
Round, Half Round, Square, Flat, Triangle etc.
Recommended for machining Carbide, hardened steel, moulds,
Dies etc.
Grit size is recommended according to the required surface
finish (Corse / Medium / Fine)
DRESSING STICKS :-
To make the free-cutting better, it is necessary to dig
the bond and expose the diamond grit on to the surface of
the diamond grinding wheel. This procedure is dressing.
Proper dressing improves wheel performance. To restore the
wheel to full cutting efficiency, wheel should be dress
at regular interval. Dressing expose the cutting point of
diamond abrasive.
Different grades of dressing stick are available.
Standard size : 20mm X 20mm X 100mm
GRINDING AND LAPPING COMPOUND
:-
This
compound provide the most efficient action for almost all
type of materials.
Recommended to achive require flatness on Ferrous - Non
Ferrous like Carbon,
Stainless steels, Ferrites, Graphite, Cast iron, Soft ceramics
etc.
Available in paste form 1 Kg. packing in corse / medium
/ fine grades.
USEFUL TIPS FOR DIAMOND
WHEEL:-
Do not apply higher
depth of cut to get proper life of wheel. Apply coolant when
grinding with Metal bonds. Never grind any
steel part with Diamond wheel. Small contact area
between wheel & work piece gives cooler & greater cutting
efficiency. Open wheel face
with dressing stick when wheel is loaded or clogged. Never go for cheap
wheel as total cost is high.
